For beginners who have never set a vapor, it would be nice to dig up various information and ask the experts about the coil and ohms. Both of these must be adjusted properly and precisely because if it is not balanced it will cause sparks that cause damage and explosion to the vapor. It’s good before making a coil and determining the right ohm to see the ability of the vapor owned again. Meanwhile, you may also need to learn How to Turn Wax into E Liquid .
The quality and durability of the vapor affect the setting of watts and ohms of the coil in the coil. If the vapor value is below the ohm and coil values then it is certain that the vapor will not last long and will be damaged quickly.
Knowing the Battery Amper Used in the MOD Vapor
Batteries are one of the most important parts of the vapor. Batteries as electricity sources that convert liquid liquids into smoke must also be considered in setting ohms and wattages in the vapor. A simple formula in calculating the battery and ohms is to divide the voltage between the number and the ampere number so that the lowest ohms are found which are the boundary points of the ohms in the vapor.
After knowing big ohms, it can only determine the number of the coil that will be used on the vapor. If the coil is made below the ohm standard then what happens is the conclusions on the vapor. The consequence is that the vapor will be damaged and even explode if the resistance between the ohm and coil is unbalanced and unstable.
Make Coil Over the Ohm Value with a Minimum of 0.10 ohms
To avoid damage caused by instability between ohms and coil, the coil value in the vapor must be above the ohm value. Carefully calculate each coil used and note the ohm resistance of the battery so that the vapor is maintained of its quality.